![]() Please do not make requests for copies of radio programming software which is sold (or was sold) by the manufacturer for any monetary value. This entry was posted in Articles on Jby Rick.To anyone looking to acquire commercial radio programming software: If these instructions are followed correctly, the programming software for your radio should be able to recognize the correct COM port and access your programming cable. If you are using CHIRP programming software, go to the CHIRP web site at and download the latest daily build of CHIRP or report the issue to CHIRP. If the program does not recognize the programming cable or the COM Port assigned to it, refer to the manufacturer of the programming software. Run or close and restart the programming software. If a new COM Port number was assigned to the cable and it is still not recognized by your programming software, skip to Step 6.Note the new COM Port number assigned to the USB Programming Cable and go back to Step 3.Click OK to save the setting, then click OK again to exit the Communications Port (COMX) properties window.Click the drop down list next to COM Port Number: and choose a COM Port below the number 10 that is not in use.Open the Device Manager, go to Ports (COM & LPT) and right click on the listing for the USB programming cable.Assign another COM Port to the USB programming cable. If the COM port assigned to the programming cable is NOT listed as available, go to Step 4.If the COM port assigned to the programming cable is listed as active and available, choose it and skip to Step 5.Verify the correct COM Port is recognized and listed as active in the programming software. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |